B&G Broadband 3G™ Radar

For technical advice, product information or to organise an installation, please register an enquiry about this product.

B&G's Broadband 3G™ Radar provides amazing target resolution, even at an unprecedented 1/32 nm range. Docks, channel markers, moored vessels and other critical targets are displayed with clarity and separation, for added confidence in close quarters. Broadband Radar™ technology also eliminates the "main bang" of a pulse radar — the obscured "dead zone" immediately around the vessel — which interferes with close target detection. roadband 3G™ Radar allows you to see more targets further away from your boat. Now you get the same impressive short-range capabilities of the original Broadband Radar with the addition of exposing targets previously unseen before.

Features

  • 30% longer range with 2x transmit power
  • 50m short range, perfect for navigating into unknown harbours
  • Crystal clear image of your surroundings using AUTO Harbour/Offshore modes - no manual tuning required
  • Extremely low radiation, can be mounted anywhere
  • InstantOn™ - no warm up time
  • Fast Scan mode up to 36RPM less than 2nm for rapid update of close range targets
  • Low power consumption, ideal for sailboats
  • True Motion mode - easily distinguish moving and static targets
  • 10 target MARPA and AIS vessel tracking for awareness of other vessels
  • Dual Guard Zones, EBL, VRM
  • Compatible with Zeus Z8 and Z12 displays

Specifications

  • Antenna Beam Width Horizontal 5.2°+/-10% (-3dB width) °
  • Antenna Beam Width Vertical 25°+/-20% (-3dB width) °
  • Antenna Receiver Noise Figure 6 dB
  • Antenna Rotation Speed 24/36 rpm +/- 10% RPMs
  • Radar Warm Up Time 0 min
  • Radar Wind Resistance 51 m/sec (Max:100 Knots)
  • Transmitter Frequency X-band - 9.3 to 9.4Ghz
  • Transmitter Power Output (at antenna port) 165mW nominal
  • Data I/O Protocol High Speed Ethernet
  • Mounting Bolts: 4x30xM8 - 304 stainless steel
  • Waterproof Standard IPX6
  • Height 280 mm \ 11 in
  • Diameter 488 mm \ 19.2 in
  • Weight 7.4 kg \ 16.31 lbs
  • Humidity +35°C (95°F) 95% RH
  • Operating Temperature -25° to +55°C (-13° to +130°F)
  • Power Supply 9V to 31.2Vdc (12/24 Volt systems) Reverse polarity protection vDC
  • Power Consumption 18W (Typ.) @ 13.8Vdc
  • Power Consumption Standby 2W (Typ.) @ 13.8Vdc – only 150ma
  • Compliance CE, FCC (ID: RAY3G4G), IC: 4697A-3G4G
  • Interconnection Cable 20m (33ft) standard with RJ45 thin custom (Max 30m)
  • Interface Heading SimNet or NMEA 0183 with cable kit into display
Follow us: | | Subscribe | © 2017 Olectric Systems Pty Ltd. Gladesville NSW Australia | Phone +61 2 9807 5568